Quick answer: Clean Jordans one material at a time. Start with a dry brush, scrub the midsoles with a stiff brush and a few drops of Deep Cleaning Solution, clean leather and mesh with Ready-To-Use Foam on a soft brush, and treat suede with a brush and eraser first. Blot, dry at room temperature, then protect the pair with Repel.
- Hands-on time: about 25 minutes
- Drying: overnight
- Works on: leather, suede, nubuck, mesh and rubber soles
Jump to: Know your materials · What you'll need · Steps · By model · Mistakes to avoid · FAQ
Why Jordans Need More Than One Method
Almost every Jordan mixes materials: smooth leather, suede or nubuck overlays, mesh or netting, and rubber midsoles. One scrub for the whole shoe is how suede gets matted and leather gets scratched. Clean the soles first, then each upper material the way it likes, so you never push dirt onto a panel you just cleaned.
What You'll Need
Essential Kit
Concentrated Deep Cleaning Solution and a stiff Durables brush, built for leather, rubber and plastic.
Shop now Essential Kit
Premium Suede Cleaning Kit
A suede eraser and brush for dry cleaning suede and nubuck panels.
Shop now Premium Suede Cleaning Kit
Quick Clean Kit
Ready-To-Use Foam and a soft Delicates brush for leather, mesh and knit uppers.
Shop now Quick Clean KitStep by Step
Prep and Soles
-
Dry brush and unlace
Take the laces out, then brush off dust and dried mud with a dry brush. Get into the welt and the seams.
-
Scrub the midsoles
Dip the Durables brush in water, add a few drops of Deep Cleaning Solution and scrub the midsole and outsole in small circles. Wipe off the foam with a microfiber towel. Keep the stiff brush off suede, mesh and delicate panels.
Clean the Uppers
-
Leather panels
Pump Ready-To-Use Foam onto the soft Delicates brush and work it over smooth leather in small sections. Wipe off the dirty foam with a microfiber towel and avoid soaking the leather.
-
Suede and nubuck panels
Work dry first. Rub marks out with the suede eraser, then brush the nap back up. Use foam only on what is left, over the whole panel so it dries evenly.
-
Mesh and netting
Use foam and the soft brush with light pressure, then blot. Mesh traps dirt, so work in short strokes.
Dry and Protect
-
Blot and dry
Stuff the shoes with paper towels and let them dry overnight at room temperature. Suede looks darker while damp, so judge it in the morning.
-
Protect the pair
Mist Repel from 6 to 8 inches away and let it dry completely. Reapply after every deep clean.
Jordan Models and What to Watch For
| Model | What to do |
|---|---|
| Jordan 1 | Smooth leather with suede on some pairs. Foam on the leather, dry brush and eraser on the suede, and a stiff brush on the midsole only. |
| Jordan 3 | Printed leather panels scratch easily. Use foam and the soft brush with light pressure, and skip the stiff brush on the print. |
| Jordan 4 | Suede or nubuck with mesh netting. Dry brush the suede, then use light foam on the netting and blot. |
| Jordan 11 | Patent leather with a mesh or textile upper. Wipe the patent with a damp microfiber towel and keep stiff brushes off it. |
Not sure what your pair is made of? Start with the gentlest method, a dry soft brush, and work up from there. For the full leather routine, see our leather shoe guide.

Finish the job
Protect Jordans after every deep clean
Repel is a water-based, breathable barrier that helps protect against liquid and dirt. It works on absorbent materials including suede, nubuck, leather, canvas and mesh.
Shop the Repel SprayMistakes to Avoid
- Putting them in the washing machine. Tumbling can loosen glue and warp the shape. Our washing machine guide explains when a gentle cycle is an option.
- Using a stiff brush on uppers. Save the Durables brush for rubber soles. Suede, mesh and delicate leather need the soft brush.
- Using Quick Wipes on suede. They are made for leather, rubber and plastic, not suede or nubuck.
- Drying by a heater or in direct sun. Heat can crack leather and stiffen suede. Room temperature only.
- Skipping protection. A clean pair without Repel is waiting for the next scuff or puddle.
Start With the Essential Kit
Deep Cleaning Solution and the Durables brush cover leather uppers and rubber soles. Add the Suede Cleaning Kit if your pair has suede.
Shop the Essential KitFAQ
What is the best way to clean Jordans?
Clean by material. Use a stiff brush and Deep Cleaning Solution on the midsoles, foam and a soft brush on leather and mesh, and a dry brush and eraser on suede. Dry at room temperature and protect with Repel.
What is the best shoe cleaner for Jordans?
It depends on the pair. The Essential Kit covers leather uppers and rubber soles, and the Premium Suede Cleaning Kit adds the dry tools for suede and nubuck. Ready-To-Use Foam with a soft brush is the gentle option for mesh and delicate leather.
How do you clean Jordan 1 suede?
Brush the suede dry, rub marks out with a suede eraser, then brush the nap back up. If it still looks dirty, use a little foam on a soft brush over the whole panel so it dries evenly.
How do you clean Jordan midsoles?
Dip the Durables brush in water, add a few drops of Deep Cleaning Solution and scrub the midsole in small circles. Wipe it clean with a microfiber towel and keep the brush off the upper.
Can you use Quick Wipes on Jordans?
Yes on leather, rubber and plastic. Quick Wipes are not for suede or nubuck, so use the dry brush and eraser there.
Can you clean Jordans in the washing machine?
We do not recommend it. Tumbling and soaking can loosen glue and warp the shoe. Hand cleaning by material is gentler and works better.
How often should I clean my Jordans?
Wipe off dirt after you wear them, do a quick clean every few weeks if you wear them often, and deep clean when they look dirty. Protect them after every deep clean.